Inflatable water park planning

    What's the hottest ride right now? There is no doubt that it is a mobile water park project, and the requirements for the place are more flexible, and can be decided according to the actual situation of their own place.

    This article contains the following:

    1, the ground should not have a slope as much as possible

    2, the ground as much as possible to be flat

    3, the site does not have to be hardened with a pool

    4, parking should be convenient

    5. The supporting facilities should be complete

    6, the traffic should be convenient

    Try to avoid places with slopes that are high at one end and low at the other. There are three reasons: First, the force of the pool is unbalanced. The force of the large bracket pool, mainly by the bracket and the pool wall, the site has a slope, after the installation of water release, there will be water flowing to the low place, the water level will be high at one end and the end is low, and the pressure on the steel frame and the pool at the lower end is too large, and there are safety hazards. Second, tourists are prone to injury. This material is very smooth when exposed to water. Even if the ground is flat, it is not easy for tourists to stand still when playing in the pool. In the sloping pool, visitors cannot stand normally, and it is easy to accelerate fatigue, causing unexpected situations. In addition, tourists playing in the pool will inevitably cause some water waves. In a sloping pool, it is easy to form water waves towards the side with a low water level, which may flip the bracket upside down.

    Inflatable water park is to inflatable slides, inflatable pools and bracket pools and other PVC mesh products as the main business project, such materials, not afraid of water is not afraid of sun, but afraid of sharp objects. Therefore, when looking for a venue, or when dealing with the site, we must try to level the site and remove sharp objects such as stones on the site, which is conducive to the maintenance of products on the one hand, and can also ensure the safety of tourists during operation on the other hand.

    A site with a pool hardened is better, but the ground without a pool hardened is not necessarily unusable for running a water park. It is just necessary to do a surface treatment on this kind of ground to make it meet or adapt to the needs of water park operation.

    The more players the inflatable water park attracts, the greater the demand for parking. Reserving a suitable parking lot is a necessary element to reflect the humanization of the venue and facilitate tourists during operation, and it is also an important position to attract manufacturers to place on-site advertisements.

    Supporting facilities include drainage, diet, power supply, etc. should be convenient, safe and complete.

    The location is not terrible, no way to pass can be the most uncomfortable. The ability to advertise it, but not the ability to make it easy for tourists to come in, is the saddest thing.

    Product recommendation: stainless steel slide  outdoor non-standard amusement equipment