How should Leto non-standard amusement-amusement equipment be cleaned and maintained?

    If you want to extend the service life of amusement equipment, daily cleaning and maintenance is essential. So do you know how to maintain amusement equipment? Are there any tricks up the box? Let's let Letu Amusement sort out the inventory of amusement equipment maintenance tips for you, let's take a look at it!

    Outdoor non-standard amusement equipment:

    1. If it is outdoor amusement equipment such as combination slides, drill barrels, etc. should not have water after rain, if there is water, a small hole with a diameter of about 4 mm should be punched in the low place to drain water.

    2. Moisture-resistant, heat-resistant, non-fading wooden parts, can be washed with soapy water and dried, and then sprayed with 84 disinfectant to disinfect.

    3. The plastic part and glass fiber can be diluted and soaked with soapy water, disinfectant washing powder, bleaching, etc., scrubbed with a soft cloth or soft brush, and then rinsed with clean water, dried or dried with a cleaning cloth. Spray disinfect with 84 disinfectant.

    4. Amusement equipment should not only be disinfected, but also checked daily. What to check? Amusement equipment needs to check whether the connection part is firm, whether the screws are loose, whether the metal frequent activity link part needs to be refueled, and whether the circuit electrical appliances and other components are damaged. Regular inspection is not only an important part of maintenance, but also to avoid accidents, killing two birds with one stone.

    Indoor play equipment:

    1. If it is an indoor amusement park, the activity room, floor and walls need to be disinfected with ultraviolet radiation every day. At the same time, the room should be ventilated and ventilated frequently. Disinfect once a week with hydrogen peroxide spray.

   2. When cleaning electric equipment, first of all, we must ensure that the power is cut off and watering is prohibited. In general, it is necessary to scrub with a damp cloth, and after the equipment is completely dry, then connect the power supply.

    3. If the metal part of the equipment is rusty, you can first use a brush to remove the rust and wipe it with a dry cloth; After being exposed to the sun, you can buy some colorless self-spray paint, sweep and spray again from about 20 centimeters from the equipment, and then spray again after drying, which plays a protective role. Wait until the paint is completely dry before cleaning, drying and disinfection.

    4. The soft sponge part can be brushed with a soft cloth dipped in soapy water, or placed in the sun to be exposed to disinfection.

PS: Associated products